P2 Plate - Level III PE Armor

PRODUCT OVERVIEW

Rifle-rated protection at its lightest: At less than half the weight of steel and ceramic, the curved, polyethylene P2 body armor from Armored Republic has level 3 protection and is a popular option for those looking to minimize weight as much as possible. For those working near water, this armor plate’s neutral buoyancy is also an important asset.

Please Note: Due to its size and profile, this plate currently fits in our Testudo, Invictus, and Valkyrie plate carriers. Additionally, due to the way this armor functions, it is incapable of stopping MSC/EP rounds such as M855.

The P2 – Polyethylene Body Armor is made of polyethylene material and provides high-grade protection that won’t fatigue you when you’re active and won’t endanger you when you’re near water. Tested independently to NIJ Level 3 standards, the P2 plate provides level 3 protection which is capable of stopping the 7.62×51 M80 Ball at 2780 FPS. It has also been tested to stop some special threats; it will defeat 5.56×45 M193 at 3150 FPS and 7.62×39 AK-47 at 2380 FPS. Due to the way this armor functions, it is incapable of stopping MSC/EP rounds such as M855.

Polyethylene stops threats by “capturing” the bullet in its material- the heat of the spinning bullet softens the polyethylene enough to melt it partially, allowing the bullet into the material, where it then is stopped by the remaining unmelted fibers within the plate. As the bullet slows down, the polyethylene then rehardens. Because of its unique way of stopping bullets, polyethylene is able to take multiple hits without shattering like ceramic plate alternatives.

The primary benefit of the P2 polyethylene armor plate, however, is its weight: Only PE hard armor can provide rifle-rated protection at under four pounds. The greater activity this allows makes polyethylene a popular choice for some military personnel.

Material: Polyethylene, with FragLock™ Coating

Protection: 7.62 mm FMJ, Full Metal Jacket bullets (U.S. Military designation M80) with a specified mass of 9.6 g (147gr) and a velocity of 2,780 ft/s (+/- 30 ft/s).

Capability: Multi-hit protection

Form: Curved

Dimensions & Compatibility:

• 9.5″ x 12.5″
  • Weight: 3.3 (+/- .3) lbs
  • Thickness: 1″
  • Plate Carriers: Testudo, Invictus & Valkyrie

Shelf life: 5 years

Manufactured: United States

***Please note: This item is NOT returnable/refundable. All sales are final***